Feed Screw Extrusion Granulator Stainless Steel Screw Extrusion Granulator

  products Principle         

      SE mixing and output granulator is divided into soft-soft (SES) and double-side low or two types of materials. Raw materialization of material output before extrusion and kneading. (50"C) refers to sieving the paste-like and dry products into the slurry with a sieve, and then smashing or smashing the granular finished products. In order to change the uniform point of the granular products, the round particles are round. The size of the material is 0.57-2.0mm. The size of the finished product is 1.5-2mm. It is 55%.

  Products Features  
      Since the granulation process of the powdery material is completed in the wet state, the operating conditions of granulation and its subsequent processes (such as drying, packaging, etc.) are greatly improved. Generally, it can reduce the on-site dust flying by more than 90%.

      Through granulation, the phenomenon of agglomeration, bridging and pulsation that are easy to occur in powder products can be avoided, and the secondary pollution caused by the powder during the use process can be avoided, so that the physical properties of the product can be greatly improved.

      In general, the bulk specific gravity of granulated products is greatly improved, so transportation can be saved. Storage and packaging space.

      For multi-component composite and mixed products, granulation can avoid the segregation of each component, thus truly ensuring the quality of composite products.

  products parameters   

  Details Image